MOT Checks

Registration plate:
Condition, security, legibility and format of letters/numbers.

Steering and suspension:
Condition, operation, security and correct colour.

Wipers and washers:
Operate to give the driver a clear view of the road.

Condition and drivers view of the road.

Correct operation and type.

Vehicle structure:
Free from excessive corrosion or damage in specific areas. No sharp edges.

Condition, operation, security and correct colour. The headlamps will also be checked to see if the aim is correct.

All seatbelts installed are checked for type, condition, operation and security. All compulsory seatbelts must be in place.

Fuel system:
No leaks, fuel cap fastens correctly and seals securely. The fuel cap will need to be opened.

Exhaust emissions:
Vehicle meets the requirement for exhaust emission. These vary on the age and fuel type of the vehicle.

Exhaust system:
Complete, secure, without serious leaks and silences effectively.

Open and close. Latch securely in closed position. Front doors should open from inside and outside the vehicle. Rear doors may need to be opened to gain access to testable items.

Wheels and tyres:
Condition, security, tyre size and type, and tread depth. Spare tyres are not tested.

Condition, operation and performance (efficiency test). Suitable vehicles will be tested on a roller brake tester. Vehicles such as those with permanent 4-wheel drive will be tested either on a suitable road using a properly calibrated and maintained decelerometer or, a plate brake tester.